   |
|
SCANBARGE |
| Odense Denmark |
| Class |
Lloyd's
Register of Shipping +100 A1 pontoon |
| IMO
Number |
7635335 |
| Bow and Stern raked with twin skegs in the stern |
| DIMENSIONS |
| Length
overall |
92,030
m |
| Length
b.p.p. |
87,88
m |
| Breadth
moulded |
27,50
m |
| Depth
moulded |
6,10
m |
| Draft
in ballast |
0,80
m |
| Draft
loaded |
4,84
m |
| Free
board summer |
1,172
m |
| Deadweight
|
9920
Mt |
| Light
Ship |
1500
Mt |
| GT
|
4030
|
| NT
|
1209
|
| DECK LOAD |
| Uniform
deck load |
12
Mt/m2 |
| Permissible point loads: |
| On
crossing of longitudinal and transverse bulkheads |
200
Mt/m2 |
| Transverse
bulkheads |
200
Mt/m2 |
| On
any vertical web of longitudinal bulkhead at centerline
of sideshell |
200
Mt/m2 |
| On
any vertical web or side of longitudinal bulkheads |
200
Mt/m2 |
| On
any deck transverse in center tanks and wing tanks |
60
Mt7m2 |
| On
any transverse bulkhead stiffener distributed over min. |
0,8
x 1,15 m = 60 Mt/m2 |
| SPACING |
| Between
longitudinal bulkheads |
6,874
m |
| Between
transverse bulkheads |
15,9
m/10,0 m |
| Between
webs |
2,65
m/2,50 m |
| BALLASTING CAPACITY |
| 2
Ballast pumps, capacity each |
600
m3/h at a head of 15 m.w.c. |
| TANK ARRANGEMENTS |
| 20 Ballast tanks each served by a separate ballast line. 3 longitudinal and 4 transverse bulkheads |
| FENDERS |
| Three tiers of horizontal steel fenders on each side. Vertical fenders on all sides and on all four corners. Two horizontal fenders on the forward and aft end. |
| AUXILIARY ENGINES |
| 2 x 86 bhp |
| 1 x Volvo TWD 740 GE with Leroy Somer generator 200 kW |
| MOORING SYSTEM |
| 4 Hägglund winches, one on each corner. 25 ton pull on first layer, 150 meters of 22 mm steel wire. |
| 6 Double bollards in recess. |
| LIGHTING |
| Electric lighting in pump-room supplied from 1 diesel twin generator set. 4 kW, 220 V 50 Hz, complete with rectifier and battery 24 V. Navigation lights, gas-type. |
| ANCHOR |
| 1 Blohm & Voss anchor, 6000 kilos stockless, placed aft. 1 anchor wire 38 mm 610 meters length. 1 Anchor winch, pull 12 tons – placed in pump – room. |
| MAIN TOWING ARRANGEMENT |
| 2 Smit brackets SWL 100 Mt with fairleads. 1 Towing bridle 24 m length. 1 recovery winch with wire. |
| EMERGENCY TOWING ARRANGEMENT FORWARD |
| 1 Smit bracket SWL 100 Mt with fairlead. 1 emergency towing wire consisting of: steelwire dia. 70 mm 60 m length and steelwire 18 mm dia. 45 m length and 50 mm dia. polypropylene 100 m length with orange buoy in one end.
|
