Scanbarge
back| Odense Denmark |
| Class | Lloyd's register of shipping +100 A1 pontoon |
| IMO Number | 7635335 |
| Bow and Stern raged with twin skegs in the stern | |
| Dimensions |
| LOA |
92,03 m |
| LBP | 87,88 m |
| Breath moduled | 27,50 m |
| Depth moduled | 6,10 m |
| Draft in ballast | 0,80 m |
| Draft loaded |
4,84 m |
| Free board summer | 1,172 m |
| Deadweight | 9920 tons |
| Light Ship | 1500 tons |
| GT | 4030 |
| NT | 1209 |
| Deck load |
| Uniform deck load | 12 Mt / m2 |
| On crossing of longitudinal and transverse bulkheads |
200 Mt / m2 |
| Transverse bulkheads | 200 Mt / m2 |
| On any vertical web of longitudinal bulkhead at centerline of sideshell |
200 Mt / m2 |
| On any vertical web or side of longitudinal bulkheads |
200 Mt / m2 |
| On any deck transverse in center tanks and wing tanks |
60 Mt / m2 |
| On any transverse bulkhead stiffner distributed over min. |
0,8 x 1,15 m = 60 Mt / m2 |
| Spacing |
| Between longitudinal bulkheads | 6,874 m |
| Between transverse bulkheads | 15,9 m / 10,0 m |
| Between webs | 2,65 m / 2,50 m |
| Ballasting capacity |
| 2 ballast pumps, capacity each 600 m3 / h at a head of 15 m.w.c. |
| Tank arrangements |
| 20 ballast tanks each served by a separate ballast line 3 longitudinal adn 4 transverse bulkheads. |
| Fenders |
| Three tiers of horizontal steel fenders on each side. Vertical fenders on all sides and on all four corners. Two horizontal fenders on the forward and aft end. |
| Auxliary engines |
| 2 x 86 bhp 1 x Volvo TWD 740 GE with Leroy Somer generator 200 kW |
| Mooring system |
| 4 Hägglund winches, one on each corner. 25 tons pull on first layer, 150 meters of 22 mm steel wire. 6 double bollars in recess. |
| Lighting |
| Electric lighting in pump-room supplied from 1 diesel twin generator set. 4 kW, 220 V 50 Hz, complete with rectifier and battery 24 V. Navigation lights, gas-type. |
| Anchor |
| 1 Blohm & Voss anchor, 6000 kilos stockless, placed aft. 1 anchor wire 38 mm 610 meters lenght. 1 anchor winch, pull 12 tons placed in pump room. |
| Main Towing arrangement |
| 2 smith brackets SWL 100 Mt with fairleads. 1 towing bridle 24 m lenght. 1 recovery winch with wire. |
| Emergency towing arrangement forward |
| 1 smith bracket SWL 100 Mt with fairlead. 1 emergency towing wire consisting of steelwire 60 m length 70 mm dia and steelwire 18 mm dia. Steelwire 45 m length and 50 mm dia. Polypropylene 100 m length with orange buoy in one end. |
